Products

This quality carnauba cue wax is specifically formulated for billiard cues (without any harmful additives).

It's best used for finishing shafts as it provides an ultra smooth and glossy finish without all the drag associated with other waxes.

Try it as you will not be disappointed and you'll be back for more. You won't find this quality product for less!

These are the 1.7 ounce jars!!

Keep your cue shaft smooth, clean, and performing like new with this complete 4-step maintenance kit.

Includes

• (4) Ultra Plush Microfiber Cloths
• (4) Ultra Fine Cleaning Erasers
• (1) 4oz Liquid Shaft Cleaner
• (1) 1oz Cue Wax
• (1) Leather Burnisher

4-Step Cleaning System

1. Clean

Apply Liquid Shaft Cleaner using the Ultra Plush Microfiber Cloth to remove chalk, dirt, and oils.

2. Wipe

Use the Ultra Fine Cue Shaft Cleaning Eraser to remove any excess build-up

3. Wax

Apply a thin layer of Cue Wax for a smoother, protected finish.

4. Burnish

Use the Leather Burnisher to seal and slick the shaft for a professional feel.

Cue Components is finally offering their own Stack Leather Wrap™ - a superior leather than what has previously been offered by Tiger "MAP CRAP" Products.

Now available in black, Tan, Red and Navy too!

What's the difference? Well a picture is worth a thousand words. As you can plainly see the Tiger Stack Wrap are glued together from thin strands which come from waste cuttings. This is called maximizing use of your leather down to the smallest piece of crap.

There is no need to rip people off with glued together, waste cuttings when you can give them a quality product for the same price. Albeit, we don't make as much profit but we are still making a profit and that's fine with us. We don't need to make a killing as making a living is just fine.

So, what have we learned? Well, we don't know about you but we've learned that Tiger Products has been selling us crap for years and we were all taken in by his BS. You really don't know until you go out there and look around to find comparable products. We've found not only comparable but better quality and we can sell it to you for less than you can buy it from Tiger even if you got their distributor pricing!

Each wrap contains enough leather (15+ feet) to do a standard wrap channel (which is 99.99% of all cues). If you order enough for 3 cues, you will receive over 45+ feet.
Width: 6mm
Thickness: 2mm

Restore a smooth, clean feel to your cue shaft with the Cue Components Premium Magic Eraser Pool Cue Shaft Cleaner. Designed to remove chalk, dirt, oils, and buildup, this ultra-fine cleaning sponge helps maintain consistent shaft performance and glide.

How to Use:

1. Apply liquid shaft cleaner with our Ultra-Plush Micro Fiber Cleaning Cloth
2. Use the Cue Shaft Cleaning Easer to Gently wipe along the cue shaft
3. Remove residue with the Micro fiber cleaning Cloth
4. Finish with wax or burnishing for a smooth polish

• Cleans While it Dries
• Cleans Without Chemicals
• Removes Wax Dust Without Scratching
• 80% Polyester, 20% Polymide
• 16" Square
• Pack of 4

As you may have known that Chem Pak is not producing the wax we have used for many years. so we have come up with our own formula Please check out the Cue Components's cue wax.

This quality carnauba cue wax is specifically formulated for billiard cues (without any harmful additives).

It's best used for finishing shafts as it provides an ultra smooth and glossy finish without all the drag associated with other waxes.

Try it as you will not be disappointed and you'll be back for more. You won't find this quality product for less!

These are the 2 ounce jars!!

This is a designed product that resolves 2 very common issues with billiards.

First, think of the “CueBuddy” as a rolling bridge that alleviates the need for a bridge in those ‘hard to reach’ shots. It has been approved by the APA for official Tournament Use and helps any adult pool player by adding this product in their pool cue bag. Adding the “CUEBUDDY” to the end of any pool cue makes it very easy to quickly reach those shots without the use of a bridge (the 2 stick method).

Second, it resolves a very common problem for pool table owners with children. This also applies to bumper pool tables and snooker tables. When we were very young, my uncle never let us play on his pool table using any pool cues. “Only roll the balls around” was what we heard :-) Many owners do not want children playing on their pool tables for fear of the children ripping or scarring the pool table fabric with the adult pool sticks.   They can use smaller pool sticks but that does not alleviate the worry of a torn or streaked pool table fabric.   The “CueBuddy” allows young children (ages 6-12) to play pool but makes it impossible to scratch the table.   Children lack the dexterity needed to make a bridge with their front hand and can never adequately hold onto the pool stick properly.  The “CueBuddy can be added to any pool stick and allows any child to learn the game of pool yet never do any physical damage to the table, and yet allows them to hit the cue ball with comfort and accuracy.  

The “CueBuddy” allows children to play on any pool table surface using only one hand, line up the cue ball, and play without learning the complex two-hand positions.  The “CueBuddy” (pool stick add-on) will always be lined up at the correct height of the cue ball and the user simply needs to push the stick forward to hit the cue ball. Aiming is just as easy.

The main white body of the  “Cue Buddy” is made at home with a 3D printer (as shown to the right). A variety of color combinations can be built using the 5 wheel colors (Black, Grey, Green, White & Red).

This is a wonderful item to add to any large floor type lathe. It insures complete accuracy and holds work pieces accurately centered in the lathe. This is an item that no serious cue builder should be without. In fact, we use this very chuck on most of our large lathes. It insures total accuracy and is great as it steadies and holds long work pieces perfectly centered. It has a large 1 3/8" bore which is more than adequate enough for working on most any cue. The chuck comes machined with inside threads (1 9/16-32) but you will have to machine a coupler which is simple enough to make for those of you who own large lathes.

We are offering the finest and most populate size dyed sycamore available in 1.350" X 11.5" X .6mm thick. These veneers strips are high quality and very consistent. The colors are vibrant, consistent and have withstood the test of time. We offer a variety of different colors and are always adding more

For your edification, the .6mm are .75 each. The .6mm are great for any application especially when doing 4, 5, 6, or 8 points and if you want 3, 4 or even 5 veneer colors.

We no longer carry the .9mm veneers as they are no longer popular since most cue makers and buyers are trending towards finer and more detailed craftsmanship.

Cyanoacrylates (CAs) have become the adhesive of choice for many cue building applications. High quality CAs, when used properly, form bonds that in many cases are stronger than the material that is being adhered.

Our Cyanoacrylates are highly refined which, combined with its freshness, gives a guaranteed 2 year shelf life. There is no finer CA available.

A Word From Cue Components: We have used every product on the market and this CA is by far the finest for custom cue building. Our CA is highly refined and fresh, fresh, fresh. Our CA doesn't sit in the manufacturers warehouse and then sit on store shelves for months. Freshness is very important. Try it and see for yourself. If you are not 100% satisfied, just return the unused portion for a complete refund.

How To Use Cyanoacrylates

Heat and moisture will decrease the shelf life of CAs. Unopened bottles can be stored in a freezer or refrigerator, but allow them to reach room temperature before using. Keep your bottles in a cool place that won't be exposed to direct sunlight and store away from bottles of accelerators. Due to the freshness of our CAs, their shelf life is guaranteed for 24 months.

For the initial opening of the top, loosen and retighten the top first to relieve internal pressure, then hold the bottle against a near vertical surface and cut off the top 1/32" with a knife or razor blade without squeezing the bottle. To prevent clogging, do not let the tip of the nozzle touch a surface that has been sprayed with any Accelerator. Before replacing the colored cap, set the bottle down hard to knock the remaining CA back into the bottle before squeezing it in an upright position to blow air through the nozzle, then wipe the tip clean.

With all CAs, the closer the parts fit together, the stronger the bond. Always hold the bonding surfaces together as tightly as possible. Any rough spots on the mating surfaces should be smoothed out. Although CAs will hold objects together with considerable strength within seconds, the full strength of the bond is not reached for several hours. Allow for this before subjecting parts to maximum stress. Also, CAs are generally a little less brittle and have higher strength when they are allowed to cure on their own.

Please Note: All our Cyanoacrylates are offered in 2 oz bottles. When comparing price, be sure you are comparing 2 oz bottles. These are 2oz bottles so be sure to compare similar sizes when checking prices.

Here is a dead center which can be used on a large metal lathe. It's long enough and the diameter is small to keep the work piece away from the headstock. The small diameter allows you to cut wood without worrying about the blade hitting the dead center.

The dead center is 5.5" long
The shank is .5"

This moisture meter can detect the water composition of a wide range of materials such as wood, bamboo, cotton, tabacco, paper and etc. It has wide measuring range of 5% to 40% moisture level. It has 4 steel sharp probes or pins and is one of the most versatile Moisture meter in the market today. Because 4 pins probe can obtain more sampling amount than 2 pins from the material being tested, you'll get more reliable, more exact, more precise measurement results and more accurate data from this moisture meter. It measures from 5% to 40% of moisture level of the object being tested, which make it an essential tool for either amateur or professional woodworkers and craftsmen.

Features:

Equipped with 4 steel pins for accurate sampling
High resolution & sensitivity
Large LCD display
Data Hold Function
Respond quickly
Low battery indication with Auto-Power Off function

Specifications:

Moisture level range : 5% to 40%
Resolution : 1%
Accuracy: 1%
Data hold (memory function)
Symbol and unit display for easy illustration of data
Power supply : 1 x 9V battery (Included)
Size : 5" x 2.50" x 1.25"
Weight : 4oz (Battery included)

1x Digital Moisture Meter
1x 9V Battery
1x sheet full instruction manual
1x carrying case

This tool is great to measure the lathe speed on all benchtop lathes and including floor models. Know the actual speed you're really turning at!

This tool measures the rotational speed with a visible red light beam from a powerful LED. It is a great tool to measure the RPM of motors and machine parts.
In wood and metal working it can be used to accurately measure the speed of a lathe or milling machine. Can be used for HVAC applications in measuring fan speed. Detection distance up to 6 feet. Highly accurate, digital laser photo tachometer.
To take the measurement, apply a reflective mark (included in package) onto the target object, aim the laser beam at the mark, the RPM displays on the LCD screen. Powered by 1 x 9V Battery (not included). Size : 180 x 72 x 37 mm(7.0 x 2.8 x 1.5 inch).

Product Features:

- Measures the rotational speed with a visible red light beam from a powerful LED
- High intensity class II laser measures from 2.5 - 99,999 RPM
- Extra large 5-digit LCD display, high accuracy of +/- 0.05%
- Auto zero adjustment, stores last, minimum, and maximum readings

Our East Indian Rosewood & Birdseye Maple 4-Prong Full Spliced Butt Blank combines timeless elegance with proven performance — built for cue makers who demand both beauty and precision.

East Indian Rosewood is prized for its deep chocolate-brown tones layered with dark espresso streaks and subtle violet undertones. Dense, stable, and naturally smooth-grained, it has long been favored in fine woodworking and instrument making. In a full splice construction, its strength and weight provide excellent balance and a solid, authoritative feel.

Paired with premium Birdseye Maple, this blank delivers striking contrast and visual depth. The bright maple base, filled with distinctive “eye” figuring, creates texture and movement under finish, making each blank unique. Birdseye Maple is celebrated for its tight grain structure, durability, and consistent playability — a cornerstone wood in high-end cue building.

The traditional 4-prong full splice design enhances structural integrity while showcasing the natural character of both woods from handle to points — a true nod to classic cue craftsmanship.

What makes this blank special:

• Rare, hard-to-source East Indian Rosewood

• Rich natural color with unique grain character
  

• Premium Birdseye maple core for stability and consistency

Take your cue building to a new level with these high quality exotic custom blanks. Now, you can make your own custom full spliced cues with these high quality handcrafted 30" butt blanks. Made of Birdseye Maple with 4 points of East Indian Rosewood. They are oversized (approximately .900/950 at the joint -- 1.350 -1.400 at the butt). The points are uniform within close tolerances. You will not be disappointed.

Some woods just feel different the moment you put them on the lathe — and East Indian Rosewood is one of them.

This East Indian Rosewood & Maple 4-Prong Full Spliced Butt Blank combines rare, beautifully aged rosewood with premium hard rock maple in a full splice. Known for its deep chocolate tones, subtle purple undertones, and tight, elegant grain, East Indian Rosewood has become increasingly difficult to source in high quality — making blanks like this harder to find and more valuable with time.

Beyond the beauty, this wood brings density, stability, and a naturally solid hit that serious cue builders appreciate. The full splice construction runs the prongs deep into the maple core, creating superior structural strength, balance, and that classic, responsive feel that only a true splice can deliver.

What makes this blank special:

• Rare, hard-to-source East Indian Rosewood

• Rich natural color with unique grain character
  

• Premium maple core for stability and consistency

If you’re building cues that are meant to last and stand apart, this is the kind of wood that elevates the entire project. Rare material. Traditional construction. Built for makers who understand the difference.

Take your cue building to a new level with these high quality exotic custom blanks. Now, you can make your own custom full spliced cues with these high quality handcrafted 30" butt blanks. Made of Maple with 4 points of East Indian Rosewood. They are oversized (approximately .900/950 at the joint -- 1.350 -1.400 at the butt). The points are uniform within close tolerances. You will not be disappointed.

1. Made of high quality elastic band, light weight, small appearance, can be easily placed in the pocket or billiard bag.
2. Wide range of applications, snooker clubs/nine clubs, etc. can be used.
3. After sticking to the tip, press the tip tightly, which can better fix the tip and make the tip stick more firmly.
4. A very useful and practical pool tip fastener for billiard ball room.
5. Easy to use, strong elastic, convenient and user‑friendly.

Item Type: Billiard  Tip Clamp

Material: Elastic Rubber+Plastic

The original Elkmaster pool cue tips. These are a soft tip and are old reliable. Elkmaster Cue Tips are manufactured from high quality mineral tanned leather which produces a tip that is long lasting, resists mushrooming and holds chalk well. These are 14mm.

Why buy Elkmaster tips and pay the high price when you can buy Blue Master Elk Cue Tips for so much less and better playability!

For the ultimate combination
try these tips with
Morakami Performance Chalk.