Pool Cue Ferrules

Fiber ferrule pads are used between the ferrule and the tip. Some believe this protects the ferrule while others believe it enhances the 'hit'. Both are actually correct. It depends which camp you're in.

We recommend using these especially with Genuine Elephant Ivory Ferrules.

Each pad is .031" thick and 14mm diameter.

Our acrylic disk ferrule pads are much softer than fiber or carbon fiber pads. They measure .552 in diameter and .080 in thickness. Our pads are thicker than our competition to allow room for error when cutting down (sometimes we shave off too much). These will protect the ferrule without compromising the hit. This material glues on best with either cyanoacrylate adhesives.

Sound Buffering Pad : Linen(Impact/Sound) Vulcanized fiber

Thickness  x Diameter : (.031" x 14.4mm)

These are 100% genuine Melamine. They play great!

Ivorite III is a Melamine based ferrule. These are the finest ferrules. Try some and see for yourself. If you don't think these are the best Melamine ferrules, simply return them and we'll refund your original purchase price plus all shipping costs. No one has ever returned these. They're the real deal.

Each ferrule is approximately .562 in diameter and 1.090" in length.

Cue Components Ivorite-III™ is the finest composite based ferrule material available for custom cue makers. The hit is the same regardless which way you hold your cue. Ivorite-III™ is strong, impact-resistant and bonds well with Cyanoacrylate and epoxy as well as wood glue. It machines, drills, taps and sands well. Ivorite-III™ will polish to a beautiful high gloss soft white finish. Unlike other ferrule materials, Ivorite-III™ is not porous and will not absorb blue chalk. It produces a solid hit. If you try it once, you'll use it exclusively on all your cues. These can be used as capped or uncapped type ferrules.

For installing tips on these ferrules we highly recommend our Cyanoacrylate for tips.

Note: This product is sold by some clowns as Aegis which is the same as Ivorite™ which is Melamine. The difference, you get to pay more for the name Aegis from the Bozo's.

Buffalo Horn Ferrules, Joints, Butts & Slabs – Natural Cue Building Material

At Cue Components, our genuine buffalo horn components are a trusted material for cue makers building or upgrading custom pool cues. We offer buffalo horn ferrules, joints, butts, and slabs, giving cue builders a versatile natural material for both performance and decorative work.

Buffalo horn is known for its strength, durability, and deep natural finish. It machines cleanly, polishes beautifully, and provides a solid, traditional feel many cue makers appreciate. Whether you’re installing buffalo horn ferrules, building horn joint collars, creating butt caps, or using slabs for inlays and accents, this material works exceptionally well in custom cue construction.

Perfect for custom cue building, cue upgrades, cue repair, and decorative inlays, buffalo horn remains a popular natural material among cue makers.

These are a fine white linen based weave. These blanks are drilled 5/16" through. These are impact resistant and quite strong whereby producing a softer medium hit. They bond well with epoxy and wood glue. The dimensions are approximately .545 in diameter and 1" in length.

Mix and Match between Off White and Pearl white.

Ivorine 3® tube is a linen based rolled and molded product. It is impact resistant and bonds with epoxy, cyanoacrylates and wood glue. It is very strong and easy to machine to a high luster and is impervious to chalk. Soft white to ivory in color. Incredible playing characteristics.

These are .562 outside diameter with a through hole of .250 inside diameter by a length of 1.08".

These are 100% genuine Micarta. They play great!

These are one of the finest ferrules money can buy. Try some and see for yourself. If you don't think these are the best Micarta ferrules, simply return them and we'll refund your original purchase price plus all shipping costs. They're the real deal.

Each ferrule is approximately .562 in diameter and 1.090" in length.

Cue Components Micarta is the finest composite based ferrule material available for custom cue makers. The hit is the same regardless which way you hold your cue. Micarta is strong, impact-resistant and bonds well with Cyanoacrylate and epoxy as well as wood glue. It machines, drills, taps and sands well. This micarta will polish to a beautiful high gloss soft yellowish finish. Unlike other ferrule materials, Micarta is not porous and will not absorb blue chalk. It produces a solid hit. If you try it once, you'll use it exclusively on all your cues. These can be used as capped or uncapped type ferrules.

Special Note: These are now available drilled and tapped (threaded). Our price is low so as to allow you the maximum savings.

For installing tips on these ferrules we highly recommend our Cyanoacrylate for tips.

These are original Meucci replacements ferrule blanks. They are .562 round X 1.250" in length or by popular demand, 1" in length. You can drill and tap these as needed for your requirements. These are priced on a per 10 basis.

For installing tips on these ferrules we highly recommend our Cyanoacrylate for tips.

These are a very light weight yet strong composite ferrule material which delivers a exceptional 'hit'. It is easily maintained, polishes to a high shine and is chalk resistant. These are slightly over 1" in length and 13mm in diameter with an inside diameter of 5/16" (.3125).

These are 100% genuine Micarta. They play great!

These are one of the finest ferrules money can buy. Try some and see for yourself. If you don't think these are the best Micarta ferrules, simply return them and we'll refund your original purchase price plus all shipping costs. They're the real deal.

Each ferrule is approximately .562 in diameter and 1.090" in length.

Cue Components Micarta is the finest composite based ferrule material available for custom cue makers. The hit is the same regardless which way you hold your cue. Micarta is strong, impact-resistant and bonds well with Cyanoacrylate and epoxy as well as wood glue. It machines, drills, taps and sands well. This micarta will polish to a beautiful high gloss soft yellowish finish. Unlike other ferrule materials, Micarta is not porous and will not absorb blue chalk. It produces a solid hit. If you try it once, you'll use it exclusively on all your cues. These can be used as capped or uncapped type ferrules.

Special Note: These are now available drilled and tapped (threaded). Our price is low so as to allow you the maximum savings.

For installing tips on these ferrules we highly recommend our Cyanoacrylate for tips.

These are original Meucci replacements ferrule blanks. They are .562 round X 1.250" in length or by popular demand, 1" in length. You can drill and tap these as needed for your requirements. These are priced on a per 10 basis.

For installing tips on these ferrules we highly recommend our Cyanoacrylate for tips.

The Lex Ferrules in solid format are made of ultra-durable Lexan (polycarbonate material). These ferrules are lightweight, resistant to cracks, and perfect for those who value durability and performance. Use them for dome ferrules or regular ferrules with exceptional grip and performance for jumps and breaks. Available in Clear or Black for customization.

The Lex Ferrules in tapped format are designed with a thread diameter of 0.2555, offering precision and reliability. Made from Lexan (polycarbonate material), these ferrules are lightweight, durable, and bendable without cracking. Perfect for jumps and breaks with added spin and draw. Available in Clear or Black.

A lightweight UV stabilized Thermoplastic material. Soft white in color with good chalk resistance, this tubing machines easily and works well with most glues. Epoxy is recommended for installation. XTC hits slightly softer than the Melamine materials. Not recommended for use in Jump/Break Cues, or for use with any coolants or solvents containing hydrocarbons when machining as the material may break down. Use of Synthetic Coolants or Solvents is fine.

Each ferrule is approximately .530 in diameter and 1.100" in length with a 5/16-14 thread and a glue relief hole.

Great lightweight ferrules.

These ferrules are available in black canvas or natural canvas variants. They are sold individually or in packs of 10. These are solid blanks that you can drill and tap yourself.

Dimensions: 0.562" diameter, 1.060" length

Recommendation: For installing tips on these ferrules, we highly recommend our          Cyanoacrylate adhesive for tips.

For installing tips on these ferrules we highly recommend our Cyanoacrylate for tips.

Aegis II is a Linen Melamine based thermoset ferrule material. It is rolled and molded for high strength. It bonds well with Epoxy, Cyanoacrylate, and wood glues. Machines well, and the color varies from soft white to Ivory colored.

Thermoset materials were originally developed as strong, inexpensive alternatives to metals for industrial applications (i.e. washers, insulators, bushings). For these types of industrial applications characteristics such as color and cleanliness are less critical. Therefore, the manufacturing process for thermosets does not adjust easily to control such factors. We have made enormous efforts to control these characteristics when manufacturing thermoset materials for the billiard industry, however, despite our best efforts you may discover some inconsistencies. Such inconsistencies are unavoidable and should be considered part of the cost of working with these materials.

Each ferrule is SOLID and approximately .562 in diameter and 1.100" in length.

This pool cue ferrule material is Genuine yellow Westinghouse Linen Micarta from many moons ago. This is a linen based micarta ferrule material (not a paper based micarta ferrule material). This linen based micarta is a strong ferrule material that will still generate a good amount of spin. These are a rare ferrule material so get them while you can. Strictly in limited supply. Pricing subject to change without notice.

The photo above shows raw solid Westinghouse Linen Micarta ferrule blanks in block form, square form, in round form, and a drilled and tapped raw micarta ferrule. And lastly, there is one finished and polished so you know what they will look like when installed (we do nice work, huh!). :-)

These are approximately .540" round x 1.060" in length. The squares have a slightly larger diameter.

Drilled and tapped are supplied in round form only. Squares cannot be supplied drilled and tapped.