Cue Building Essentials

These are the finest maintenance kits available and they offer versatility. These are best used when doing shaft and butt repairs when you need the work piece held precisely and firmly in your chuck. Each tool contains the male and female end. The barrel (without the threads) measure approximately 3" and the barrel is approximately .600" is diameter and made of high grade aluminum.

Our prices are the same for all models. You won't find these anywhere at prices this low. Only because of our huge buying power can we make these available at these ridiculously low, low prices.

We are offering the finest and most populate size dyed sycamore available in 1.350" X 11.5" X .6mm thick. These veneers strips are high quality and very consistent. You can purchase veneers strips for less but compare quality with price. Our dyed sycamore is about twice the cost of lower grade dyed poplar veneers. The colors are vibrant, consistent and have withstood the test of time. We offer 11 different colors: black, burgundy, dark blue, green, light blue, natural, orange, purple, red and yellow.

For your edification, the .6mm are .75 each. The .6mm are great for any application especially when doing 4, 5, 6, or 8 points and if you want 3, 4 or even 5 veneer colors.

We no longer carry the .9mm veneers as they are no longer popular since most cue makers and buyers are trending towards finer and more detailed craftsmanship.

We have four styles as pictured. We are selling these individually and groups of 10 and 20. Choose whatever style you like

Please click on picture for the specs of the bumpers.

A) Beveled Top (which requires an allen screw)

B) Threaded Stem Type - 3/8 x 16

C) Large Push In Flat South West Style

D) Push In Flat South West Style

Check out our new SouthWest Style Joint Pins.

Fiber ferrule pads are used between the ferrule and the tip. Some believe this protects the ferrule while others believe it enhances the 'hit'. Both are actually correct. It depends which camp you're in.

We recommend using these especially with Genuine Elephant Ivory Ferrules.

Each pad is .031" thick and 14mm diameter.

Cue Components, Infinity Jet Black Phenolic® is far better than Double Black Phenolic offered by the clowns up in Skokie., Plus we're a lot less money per foot for a far superior product!

Cue Components, Infinity Jet Black Phenolic® was developed specifically for custom cue makers. This rod is manufactured using the finest materials and a proprietary pigmented-resin system so that you don't get the linen look under magnification similar to the inferior stuff sold by other sources in Skokie. The material is strong, easy to machine, and jet black in color after applying a clear coat.

This is a 6 piece high speed steel 1/4" tool bit set and comes with:

1) Right Hand
2) Left Hand
3) Cut-Off Tool
4) Boring Bar
5) 45 Degree
6) Round Nose

Cue Components Pure White Phenolic® was developed specifically for custom cue makers. This rod is manufactured using the finest materials and a proprietary pigmented-resin system so that you don't get the linen look under magnification similar to the inferior stuff sold by other sources in Skokie. The material is strong, easy to machine, and Pure White in color after applying a clear coat.

Prices are per Foot. 

These are original Meucci replacements ferrule rods. They are .562 round X 1 foot in length. You can cut, drill and tap these as needed for your requirements.

This is without question the finest cue makers shaft sealant/stabilizer and final coat shaft sealer on the market today.

Speed Seal II Shaft Sealer & Stabilizer is sold in 16oz bottles and applies easily. And, it dries quickly too. Very quick!

For refinishing shafts: All you do is apply two coats back-to-back, sand (with 800) and wax. It's that quick!

For sealing shafts between cuts: Best to wipe on after the first cut and then again 2 cuts from final for lasting protection and stabilization. Add again at final stage when prepping the shaft for the actual sale.

When you're done you'll have a finish that is smooth as silk and will remain that way through all the abuse of playing.

Ever wonder how some cue makers get their shafts to glide like silk? Well, wonder no more!

Leading cue makers have been using this product for years with phenomenal results. You can too.

This is another fine product to burnish all leather; either wraps or tips. Can be used to burnish our Stack Leather Wrap, cue tips or any other stack or regular leather wrap. Our liquid burnisher can be used to burnish the sides of cue tips and it can burnish all leather wraps. It can also clean the surface dirt from your shaft and ferrule as well. A great product brought to you by CueComponents.

And the best thing - it is a free marketplace product without manufacturer pricing controls. Our price is distributor pricing so pick up a few!

This is 4 fluid ounces! Not 2 ounces like other products.

These are 100% genuine Micarta. They play great!

These are one of the finest ferrules money can buy. Try some and see for yourself. If you don't think these are the best Micarta ferrules, simply return them and we'll refund your original purchase price plus all shipping costs. They're the real deal.

Each ferrule is approximately .562 in diameter and 1.090" in length.

Cue Components Micarta is the finest composite based ferrule material available for custom cue makers. The hit is the same regardless which way you hold your cue. Micarta is strong, impact-resistant and bonds well with Cyanoacrylate and epoxy as well as wood glue. It machines, drills, taps and sands well. This micarta will polish to a beautiful high gloss soft yellowish finish. Unlike other ferrule materials, Micarta is not porous and will not absorb blue chalk. It produces a solid hit. If you try it once, you'll use it exclusively on all your cues. These can be used as capped or uncapped type ferrules.

Special Note: These are now available drilled and tapped (threaded). Our price is low so as to allow you the maximum savings.

For installing tips on these ferrules we highly recommend our Cyanoacrylate for tips.

Cue Components is finally offering their own Stack Leather Wrap™ - a superior leather than what has previously been offered by Tiger "MAP CRAP" Products.

Now available in black & Brown too!

What's the difference? Well a picture is worth a thousand words. As you can plainly see the Tiger Stack Wrap are glued together from thin strands which come from waste cuttings. This is called maximizing use of your leather down to the smallest piece of crap.

There is no need to rip people off with glued together, waste cuttings when you can give them a quality product for the same price. Albeit, we don't make as much profit but we are still making a profit and that's fine with us. We don't need to make a killing as making a living is just fine.

So, what have we learned? Well, we don't know about you but we've learned that Tiger Products has been selling us crap for years and we were all taken in by his BS. You really don't know until you go out there and look around to find comparable products. We've found not only comparable but better quality and we can sell it to you for less than you can buy it from Tiger even if you got their distributor pricing!

Each wrap contains enough leather (15+ feet) to do a standard wrap channel (which is 99.99% of all cues). If you order enough for 3 cues, you will receive over 45+ feet.

Cue Components Shaft & Tip Leather Burnisher is Made In The USA of fine quality leather. You can burnish the shaft and cue tips as well.

Just grab the shaft and stroke up and down to seal the wood and make the shaft slick. This will seal out moisture and not allow the grain to raise. The shaft will be slick and smoother to the feel when shooting.

The size is 2.5" x 4".

These are high quality stainless steel and are 3/8 x 10 and 3" in length.
These are what we refer to as old reliable and a great choice for cue makers.

This quality carnauba cue wax is specifically formulated for billiard cues (without any harmful additives).

It's best used for finishing shafts as it provides an ultra smooth and glossy finish without all the drag associated with other waxes.

Try it as you will not be disappointed and you'll be back for more. You won't find this quality product for less!

These are the 1.7 ounce jars!!

This is our Ivorite-III™ Melamine ferrule material; the finest ferrule material available today. This is a Linen Melamine material that is rolled and molded for unequaled performance. This product bonds well with epoxy, cyanoacrylate and wood glue.

Our prices may be slightly higher than other resellers for similar material but our Ivorite-III™ is very clean. Those of you who have experienced black dots, streaks, etc. you all know what we're talking about. Remember, you get what you pay for.

They are .562 round X 1 foot in length.

Made in The USA

Well, it's finally here and here is as much of it as you could possibly want. This is micarta rod. It is yellowish in color. Its hit resembles the old micarta from years ago. In very high demand! You can probably buy this elsewhere but not at this huge discount.

They are .562 round X 1 foot in length.