Products

Cue Components Pure White Phenolic® was developed specifically for custom cue makers. This rod is manufactured using the finest materials and a proprietary pigmented-resin system so that you don't get the linen look under magnification similar to the inferior stuff sold by other sources in Skokie. The material is strong, easy to machine, and Pure White in color after applying a clear coat.

Prices are per Foot. 

Onyx Extreme™ Cue Tips are a medium cue tip and your best choice when you need extreme control. While there are other tips that appear similar in nature, these Onyx Extreme™ Cue Tips offer you consistent quality, consistent control, excellent chalk adhesion and a value that’s hard to beat.

Manufactured from the finest aged leather, it’s softened to meet the critical needs of players who wish to improve their game. Onyx Extreme™ Cue Tips will provide you with a medium hit and control that’s second to none. No black dyes are ever used in Onyx Extreme™ Cue Tips; the leather is all tanned naturally. It’s a slow and painstaking process but the end result is worth every minute.

The third layer up from the bottom is orange so as you warn you when it’s time for a tip replacement. This added feature will make your Onyx Extreme™ Cue Tip different than all the other black cue tips out there. It’s a full 10 layers and the same height as other look-alike cue tips. Each layer is skined to perfection.

If you require the finest glue to ensure a permanent bond that won't pop off then we highly recommend our Cyanoacrylate for tips. It works!

For the ultimate combination
try these tips with
Morakami Performance Chalk.

Here's a handy Pocket Chalker that is easy and convenient to use. We doubt that you'll find better pricing. Stock up!

For the ultimate combination
try these chalk holders with
Morakami Performance Chalk.

This is our 'live' center. You'll note that the point protrudes a little longer than usual. We made them like this to keep the work piece out far enough so that you can make cuts to the end of the wood without worrying about interference from the 'live' center. This item works on any large metal lathe using a chuck.

What we have is a silky smooth glove that will allow your cue shaft to glide through your fingers with effortless ease.

Joint protectors will protect your Joint pin from damage and protect your joint collars from chips.

We carry joint protectors in many different sizes.

We offer our joint protectors in 2 piece sets (1 butt & 1 shaft) and 3 piece sets (1 butt & 2 shafts).

Joint protectors will protect your Joint pin from damage and protect your joint collars from chips.

We carry joint protectors in many different sizes.

We offer our joint protectors in 2 piece sets (1 butt & 1 shaft) and 3 piece sets (1 butt & 2 shafts).

All are made from Black Delrin. 

We have four styles as pictured. We are selling these individually and groups of 10 and 20. Choose whatever style you like

Please click on picture for the specs of the bumpers.

A) Beveled Top (which requires an allen screw)

B) Threaded Stem Type - 3/8 x 16

C) Large Push In Flat South West Style

D) Push In Flat South West Style

Check out our new SouthWest Style Joint Pins.

One side of this two-in-one tool shapes the cue tip to a radius while the other scuffs the cue tip to hold chalk and prevent miscues.

Made of solid metal with silicon carbide, this device lasts and lasts.

This product is used by professional players.

The Pool Cue Scuffing/Shaping Cube has a successful track record because it works so well and is reasonably priced.

Many leading cue manufacturers recommend the POOL CUE SCUFFING/SHAPING CUBE.

If you want to find out the accuracy of your lathe, you chuck up on one of these dowel pins and then put a dial indicator on the pin. They measure .500" X 2.00" and are precision ground at a ISO 9001 factory.

This is a tapping accessory for use on all type lathes. This precision aid assures the same tap alignment as the drilled hole to produce accurate, improved threads and it reduces tap breakage. You'll never get more accurate tapping than with this handy tool.

Ease of Operation: Simply place the tap into the tapper. Then insert the tapper into your chuck on the tail stock. Move the tailstock forward and up to the work piece in the same plane as the drilled hole. No power is necessary as the tool is manufactured for hand tapping. Just apply some inward pressure on the "T" handle while turning to start the tap. As soon as the tapping starts, inward pressure is no longer required.

We have tapped with this tool under low power and it produces accurate and smooth threads. We do not recommend tapping under power for safety reasons. For safety we recommend rotating the chuck by hand.

If you've ever had problems creating accurate threads, this handy tool will resolve that problem. We use about 8 of these for all the different tap sizes which we use on a daily basis. They're really handy, accurate and easy to use. Saves time too! Taps not included.

This is one of the most sought-after items in billiards.

This ball has six red dots on its surface. One advantage of the 6 spot cue ball is that it makes it easy to "visualize the rotation" of the ball.

You instantly see any inconsistencies in your shot. The ball is regulation 2-1/4" in diameter and is regulation weight.

This DVD runs approximately 2.5 hours.

This is a two part DVD set which will run at least 2.5 hours. There is a lot of information in this DVD which includes proper construction methods and covers common mistakes and how to avoid them. You will have all the necessary information and you will be shown detailed techniques for constructing flawless and uniform "V" points. Everything imaginable is covered and you will not be left with unanswered questions. We cover it all and we're extremely thorough. This is the absolute best production out there for learning "V" points. You will surely not be disappointed and you'll feel that this was money well spent. This 2.5 hour production proves that we left nothing out.

This DVD will run approximately 1 hour and 32 minutes.

Installing a butt sleeve is a simple procedure, correct? Wrong. There are correct methods and incorrect methods. We show one simple method with techniques that make it easy and accurate. Additionally, we also show a method that few cue builders utilize but produces great results. We believe this method has never been shown and demonstrated. Although more labor intensive, the results are worth it. We demonstrate by showing you how to achieve total accuracy and precision as well as mastering the technique. This DVD is excellent and extremely worthwhile.

As previously mentioned, butt sleeves are a cake walk (hardly). Well, here's an unsolicited comment: "On a different note, I really liked your new dvds. I was pleasantly surprised that the butt sleeve dvd had as much information as it did". JB, IN.

For 90 minutes there's a lot of valuable information in there! You don't know it all.

This DVD will run 65 minutes.

This is an extensive DVD on all aspects of coring. We demonstrate coring techniques, necessary tools and woods as well as in-depth discussion. We show you what to do and why you need to do it as well as what not to do. Nothing is missed as this is a thorough demonstration and teaching DVD.

This DVD will run approximately 1 hour and 35 minutes.

Finish a cue with Cyano? Sure, why not. It's easy, fast and lasts when done properly. We demonstrate technique and how to avoid cracking, lifting and fading by using the right products. This DVD shows full application techniques as well as proper sanding technique to avoid 'hills and valleys'. When you site down the cut it will look like glass.

This DVD will run about 65 minutes.

This is probably one of the hardest things to master in cue construction. When we finished taping this DVD, Bob said that we made it look so easy. And it really is. If you follow our step-by-step procedure, you too will find it easy. We've seen so many cue makers battling themselves in this area of construction when it's all unnecessary. If you listen and apply, it will all come together for you as easily as it does for us each and every time. It's not difficult once you know proper techniques.

This DVD will run about 65 minutes.

This is one of the hardest parts of cue building to master. We've taught people how to do a joint pin and they do it accurately in our presence but when they try to do it at home it's not so easy. The joint pin installation can be one of the most frustrating areas to cue building.

In this video, we'll show you how to properly install a joint pin. We'll show you what you need, why you need them and finally how to do it. We'll also show you how not to install a joint pin and why the problem is created by different methods. We'll also show you how to save that cue from an improperly installed joint pin. You'll learn everything you need to learn and why things happen and finally how to do it properly for 100% success each time.

And we'll show you two different methods of properly installing the joint pin and two different methods of when to install it.