Marakami

Well, it's finally here and here is as much of it as you could possibly want. This is micarta rod. It is yellowish in color. Its hit resembles the old micarta from years ago. In very high demand! You can probably buy this elsewhere but not at this huge discount.

They are .562 round X 1 foot in length.

Well, it's finally here and here is as much of it as you could possibly want. This is micarta tube that has an outside diameter of .562" with an inside diameter of .250". It is yellowish in color. Its hit resembles the old micarta from years ago. In very high demand! You can probably buy this elsewhere but not at this huge discount.

Price per foot. 

Cue Components, Infinity Jet Black Phenolic® is far better than Double Black Phenolic offered by the clowns up in Skokie., Plus we're a lot less money per foot for a far superior product!

Cue Components, Infinity Jet Black Phenolic® was developed specifically for custom cue makers. This rod is manufactured using the finest materials and a proprietary pigmented-resin system so that you don't get the linen look under magnification similar to the inferior stuff sold by other sources in Skokie. The material is strong, easy to machine, and jet black in color after applying a clear coat.

These are a fine white linen based weave. These blanks are drilled 5/16" through. These are impact resistant and quite strong whereby producing a softer medium hit. They bond well with epoxy and wood glue. The dimensions are approximately .545 in diameter and 1" in length.

Mix and Match between Off White and Pearl white.

Here's a handy Pocket Chalker that is easy and convenient to use. We doubt that you'll find better pricing. Stock up!

For the ultimate combination
try these chalk holders with
Morakami Performance Chalk.

This is our 'live' center. You'll note that the point protrudes a little longer than usual. We made them like this to keep the work piece out far enough so that you can make cuts to the end of the wood without worrying about interference from the 'live' center. This item works on any large metal lathe using a chuck.

What we have is a silky smooth glove that will allow your cue shaft to glide through your fingers with effortless ease.

Joint protectors will protect your Joint pin from damage and protect your joint collars from chips.

We carry joint protectors in many different sizes.

We offer our joint protectors in 2 piece sets (1 butt & 1 shaft) and 3 piece sets (1 butt & 2 shafts).

We have four styles as pictured. We are selling these individually and groups of 10 and 20. Choose whatever style you like

Please click on picture for the specs of the bumpers.

A) Beveled Top (which requires an allen screw)

B) Threaded Stem Type - 3/8 x 16

C) Large Push In Flat South West Style

D) Push In Flat South West Style

Check out our new SouthWest Style Joint Pins.

One side of this two-in-one tool shapes the cue tip to a radius while the other scuffs the cue tip to hold chalk and prevent miscues.

Made of solid metal with silicon carbide, this device lasts and lasts.

This product is used by professional players.

The Pool Cue Scuffing/Shaping Cube has a successful track record because it works so well and is reasonably priced.

Many leading cue manufacturers recommend the POOL CUE SCUFFING/SHAPING CUBE.

If you want to find out the accuracy of your lathe, you chuck up on one of these dowel pins and then put a dial indicator on the pin. They measure .500" X 2.00" and are precision ground at a ISO 9001 factory.

This is a tapping accessory for use on all type lathes. This precision aid assures the same tap alignment as the drilled hole to produce accurate, improved threads and it reduces tap breakage. You'll never get more accurate tapping than with this handy tool.

Ease of Operation: Simply place the tap into the tapper. Then insert the tapper into your chuck on the tail stock. Move the tailstock forward and up to the work piece in the same plane as the drilled hole. No power is necessary as the tool is manufactured for hand tapping. Just apply some inward pressure on the "T" handle while turning to start the tap. As soon as the tapping starts, inward pressure is no longer required.

We have tapped with this tool under low power and it produces accurate and smooth threads. We do not recommend tapping under power for safety reasons. For safety we recommend rotating the chuck by hand.

If you've ever had problems creating accurate threads, this handy tool will resolve that problem. We use about 8 of these for all the different tap sizes which we use on a daily basis. They're really handy, accurate and easy to use. Saves time too! Taps not included.

This is one of the most sought-after items in billiards.

This ball has six red dots on its surface. One advantage of the 6 spot cue ball is that it makes it easy to "visualize the rotation" of the ball.

You instantly see any inconsistencies in your shot. The ball is regulation 2-1/4" in diameter and is regulation weight.

This double sided micro pro disc is the most advanced system for shaft conditioning.

Use Q-Wiz as often as you like without fear of damaging your shaft or reducing its size.

Space age material, easy to carry, improves your stroke.

We are the Master Distributor for this item and have the absolute lowest price anywhere!

These are similar to the 'Radial' pin but we're not allowed to use the word 'radial' as it is trademarked so we're using the word 'radius'. You can buy the 'radial' pin and pay more or you can buy our 'radius' and save money. We defy you to tell them apart. These are 3/8 x 3" stainless steel.

This is a high quality chalk holder with a retractable cord. You can clip it on your pocket, belt, or belt loop. The back end is chrome plated for lasting value and strength. Not flimsy plastic as other sellers offer.

Don't waste time looking for a good piece of chalk when you could be shooting pool. Please have a look at our other pool cue accessories and billiard related items.

For the ultimate combination
try this holder with Morakami Performance Chalk.

This is our brand new Scuffer-Chalker. It comes in black, red, and pink. The chalk can easily be changed out and the scuffer will give you a precision nickel radius. Included is Masters chalk but you can upgrade to Performance Morakami Chalk for $2.00.

This is the best and least expensive shaft cleaner that actually works without abrasive chemicals for cleaning your shaft, ferrules and even leather!

So easy to use, just wipe it on and wipe it off! Watch the dirt disappear.