Search results
Search results
Our acrylic disk ferrule pads are much softer than fiber or carbon fiber pads. They measure .552 in diameter and .080 in thickness. Our pads are thicker than our competition to allow room for error when cutting down (sometimes we shave off too much). These will protect the ferrule without compromising the hit. This material glues on best with either cyanoacrylate adhesives.
East Indian Rosewood & Birdseye Maple 4-Prong Full Spliced Butt Blank
East Indian Rosewood & Birdseye Maple 4-Prong Full Spliced Butt Blank
Our East Indian Rosewood & Birdseye Maple 4-Prong Full Spliced Butt Blank combines timeless elegance with proven performance — built for cue makers who demand both beauty and precision.
East Indian Rosewood is prized for its deep chocolate-brown tones layered with dark espresso streaks and subtle violet undertones. Dense, stable, and naturally smooth-grained, it has long been favored in fine woodworking and instrument making. In a full splice construction, its strength and weight provide excellent balance and a solid, authoritative feel.
Paired with premium Birdseye Maple, this blank delivers striking contrast and visual depth. The bright maple base, filled with distinctive “eye” figuring, creates texture and movement under finish, making each blank unique. Birdseye Maple is celebrated for its tight grain structure, durability, and consistent playability — a cornerstone wood in high-end cue building.
The traditional 4-prong full splice design enhances structural integrity while showcasing the natural character of both woods from handle to points — a true nod to classic cue craftsmanship.
What makes this blank special:
-
Rare, hard-to-source East Indian Rosewood
-
Rich natural color with unique grain character
-
Premium Birdseye maple core for stability and consistency
Take your cue building to a new level with these high quality exotic custom blanks. Now, you can make your own custom full spliced cues with these high quality handcrafted 30" butt blanks. Made of Birdseye Maple with 4 points of East Indian Rosewood. They are oversized (approximately .900/950 at the joint -- 1.350 -1.400 at the butt). The points are uniform within close tolerances. You will not be disappointed.
This DVD will run 72 minutes.
This DVD will cover proper shaft cutting techniques for maximum yield. Shafts have a tendency of warping and our procedure for cutting shafts and how is by far the very best. It yields almost 100% usable shaft wood with minimal warping. Joe has tested and tried many methods and procedures. This DVD shows the best time schedule, method and to what size as well as dipping procedures in Shaft Dip (the DVD mentions Resolute but substitute it with Shaft Dip). This is a must have for the beginner and even the veteran as we can all learn something.
Ivorine 3® tube is a linen based rolled and molded product. It is impact resistant and bonds with epoxy, cyanoacrylates and wood glue. It is very strong and easy to machine to a high luster and is impervious to chalk. Soft white to ivory in color. Incredible playing characteristics.
These are .562 outside diameter with a through hole of .250 inside diameter by a length of 1.08".
These are original Meucci replacements ferrule blanks. They are .562 round X 1.250" in length or by popular demand, 1" in length. You can drill and tap these as needed for your requirements. These are priced on a per 10 basis.
For installing tips on these ferrules we highly recommend our Cyanoacrylate for tips.
Aegis II is a Linen Melamine based thermoset ferrule material. It is rolled and molded for high strength. It bonds well with Epoxy, Cyanoacrylate, and wood glues. Machines well, and the color varies from soft white to Ivory colored.
Thermoset materials were originally developed as strong, inexpensive alternatives to metals for industrial applications (i.e. washers, insulators, bushings). For these types of industrial applications characteristics such as color and cleanliness are less critical. Therefore, the manufacturing process for thermosets does not adjust easily to control such factors. We have made enormous efforts to control these characteristics when manufacturing thermoset materials for the billiard industry, however, despite our best efforts you may discover some inconsistencies. Such inconsistencies are unavoidable and should be considered part of the cost of working with these materials.
Each ferrule is SOLID and approximately .562 in diameter and 1.100" in length.
This is our large concave 'live' center. It's designed to spin a shaft while holding the tip firmly in place. It can be used with any large metal lathe using a chuck.
Keep your cue shaft smooth, clean, and performing like new with this complete 4-step maintenance kit.
Includes
- (4) Ultra Plush Microfiber Cloths
- (4) Ultra Fine Cleaning Erasers
- (1) 4oz Liquid Shaft Cleaner
- (1) 1oz Cue Wax
- (1) Leather Burnisher
4-Step Cleaning System
1. Clean
Apply Liquid Shaft Cleaner using the Ultra Plush Microfiber Cloth to remove chalk, dirt, and oils.
2. Wipe
Use the Ultra Fine Cue Shaft Cleaning Eraser to remove any excess build-up
3. Wax
Apply a thin layer of Cue Wax for a smoother, protected finish.
4. Burnish
Use the Leather Burnisher to seal and slick the shaft for a professional feel.
There are knock-offs of this cutter out there which are imported from overseas. Ours is made in America. That's the difference in price. If you want to save then buy their cutter but if you want American quality and precision, then this is the cutter for you.
This tool is great for table top lathes such as Porper, Hightower and Unique (taper shaper and their CNC) as well as larger floor lathes and Align-Rite CNC machines. The diameter is 1.25" with a 1/4" shank; incredibly small but with the necessary power. Carbide Tipped!
This is made on a CNC machine and the blades are all in-line with one another. This is a 6 flute router bit for extreme accuracy, smooth cuts and less vibration. You'll get ultra smooth cuts on shafts and butts. The cut is so smooth that it appears as if the finished piece has been sanded and buffed! Exceptionally clean cuts. A must for the serious cue builder.
We use this 6 flute blade on our router when cutting shafts and butts with our 14" X 40" tapering lathe as well as other machines. This is a great cutter!
- Unsolicited Testimonial -
"I just used my new 6 fluted router blade. This blade is far superior to any other, it's hard to describe the results. The cut is much faster and smoother than anything I have ever used. I want to thank Cue Components for making such a great product available". CS Warsaw, MO
Samson Pool Cue Tips are 14mm and 12 layers. Samson Tips are medium tips that are the rage because of their consistent quality and low price. Samson Pool Cue Tips are made from high grade pig skin and pressed together using the latest adhesives and pressure treatments. Samson Tips transfer more spin and control over other similar tips and really hold chalk well. Samson tips hold their shape!
- Unsolicited Testimonial -
I really like these tips and have put 3 on the 7 on my sticks and have noticed a great improvement over the single layer tips I was accustomed to. I was a dedicated Triangle user for 20 years. Thank you for a great product.
J.M. Yakima, WA
Samson tips are guaranteed to hold chalk well and will not mushroom. Samson Tips will give you maximum control, consistency and least amount of deflection a tip can offer.
Buy some today as you wont be disappointed. They work real well and don't let the low price fool you. We're the direct importers so no middlemen to hog up all the profits where we can pass the savings on to you and we do!
For the ultimate combination
try these tips with
Morakami Performance Chalk.
If you require the finest glue to ensure a permanent bond that won't pop off then we highly recommend our Cyanoacrylate for tips. It works!
Only available in Medium!
These American Raptor Pool Cue Tips are 14mm. They have 9 consistent and skillfully skived brown layers of fine grade 1 pigskin. There is a special red layer of fine pigskin for a total of 9 layers of precision.
These tips grab the ball, hold chalk really well, don't glaze over, don't mushroom and your miscues will be non-existent. Buy some & try some -- you'll be glad you did.
With the American Raptor Performance Cue Tip you'll have your opponent guessing just what's on your cue which allows you to have such control to make the cue ball dance on the table.
For the ultimate combination
try these tips with
Morakami Performance Chalk.
If you require the finest glue to ensure a permanent bond that won't pop off then we highly recommend our Cyanoacrylate for tips. It works!
The White Diamond Ultra cue tip is one of the real secrets for a top performing jump cue or break cue. Picone White Diamond tips are a multi-layered tip. Made from a specially selected fiber, they go through an 11 step process before becoming a finished tip. Each tip is inspected before packaging to the insure you the highest quality.
Only available in 14 millimeter diameter.
What is the difference in the "Picone White Diamond Ultra tip"?
* The "Picone White Ultra Diamond tip" is not a phenolic tip. Phenolic resins are hard and brittle and although they do make the ball jump as well as break hard, can be difficult to glue and very prone to miscues.
* It allows you to put english on the cue ball. You can jump with english, stop the cue ball, even drawing it back.
* When used for the break or jump-cue, gone is the glass breaking sound and fear of miscue.
* Tips can be glued on with most common Super-Gels or epoxies, and are much less prone to popping off.
* They are easily installed even with standard cue repair tools, you do not need a lathe. It is best to use a tip close to the size of the shaft for easier installation. If you have no experience with tip installation though, it is still best left to the professional.
* No need to change your ferrule and because the tip is layered, it will not chip, fracture or split as is common with tip-ferrule combos made from common phenolic rod.
* The Picone White Diamond Ultra tip is not harmful to balls or equipment.
The Finishing Touch Your Wood Shaft Deserves.
Run the Pagulayan Brown Leather Burnisher across your wood shaft or cue tip and feel the difference immediately — a smooth, sealed surface that repels moisture, reduces fuzzing, and keeps your tip holding its shape session after session. Compact enough to slip into any case pocket, it’s the kind of tool you reach for every day without thinking twice.
Note: For carbon fiber shafts, use the Pagulayan Black Leather Burnisher instead. Do not burnish carbon fiber shafts directly.
Features
- Smooths and seals wood shafts and cue tips
- Reduces fuzzing and surface wear
- Helps maintain cue tip shape over time
- Prevents moisture absorption
- Compact and travel-friendly
- Built for daily maintenance
G² Japan stands for "grip square" (for those of you who flunked out of math class). You remember the stuff we learned that would never use like 'Pi r squared'. If you knew it would apply to billiards, you would have paid more attention.
Why buy G2 Japan when you can buy G2 USA for so much less. Read all about it here.
G2 Japan cut our supplier off because they were selling us tips which we sold below their suggested and inflated Minimum Advertised Pricing or MAP. Screw them! They want to charge you more money and fix prices against the American consumer. Only morons pay full retail so vote them out and don't buy G2 Japan tips because they are greedy and money hungry and don't support a free American marketplace. They want to fix prices against a free marketplace with the cooperation of dealers who put money over principal. These same dealers allow foreign products to dictate pricing in a free American marketplace. It's just not right.
Anyway....
The tips play surprisingly well and are being promoted with much fan fare. They have an exceptional grip and a solid feel.
You'll be pleasantly surprised at how well they play.
These are supplied at 14mm diameter in Soft, Medium and Hard.
You can purchase your products from the high priced sellers or you can purchase these tips from the best known seller. We price these things at wholesale because of our sources, volume purchasing power and desire to pass the savings on to our friends and clients. Remember, we're wholesale to the public. Don't be fooled or let anyone tell you otherwise.
And now something from the, 'it doesn't jive category'. When you click the link above to query your genuine tip, please look at the URL (the address of the website you're on. Notice is shows "http://www.china3-15.net/32/index.asp"). Now, ask yourself this amazing question. Why on God's green earth do I have to query a web site in China for a tip supposedly manufactured in Japan? That's the first clue. Supposedly, the founder of G2 Japan tips lives in Hong Kong so that's why the web site is hosted in China. Read on...
The company that labels the tips is in China as well. We will now double down and still maintain our stance as knowledgeable sellers and manufacturers of tips and other stuff that G2 Japan tips ARE NOT MADE IN JAPAN! The tips are made in China, printed in China, labeled in China, security strips added in China, boxed in China and sold from China as a Japanese product.
Why purchase G2 Japan cue tips when you can buy a comparable G3 Cue Tip for so much less! They're a great tip and once on the cue, you'll never be able to tell the difference. They play great! Try some and you'll be convinced too. Yes, our G3's are that good!
Out Of Stock because G2 Japan didn't like us selling them below their suggested and inflated Minimum Advertised Price (MAP) so they cut us off. So, buy G3's & enjoy the savings.
Built for Carbon Fiber. Perfected for Your Tip.
The Pagulayan Black Leather Burnisher is purpose-built for cue tips on carbon fiber shafts. A few passes leaves your tip smooth, sealed, and ready to perform — reducing fuzzing, preventing moisture absorption, and helping your tip hold its shape longer. Small enough to take anywhere, it’s the daily maintenance tool carbon fiber players have been missing.
Note: Do not burnish the carbon fiber shaft itself. For shaft smoothing, use Pagulayan Satin Touch. For wood shafts, choose the Brown Leather Burnisher.
Features
- Designed specifically for cue tips on carbon fiber shafts
- Smooths and seals tips for a clean, polished finish
- Reduces fuzzing and tip wear
- Helps maintain tip shape and prevents mushrooming
- Prevents moisture absorption
- Compact and travel-friendly — built for daily use
Sumo tips are made from water buffalo and are a hard tip These are great for breaking or jumping. You can even use them as a playing tip assuming you like a hard tip. These are only available in 14mm.
SORRY, SOLD OUT!
Try Super Pro.
LIMITED QUANTITIES AVAILABLE : We were fortunate to buy out the last remaining hoard. When these are gone, they're gone for good.
If you require the finest glue to ensure a permanent bond that won't pop off then we highly recommend our Cyanoacrylate for tips. It works!
Never Lose Your Chalk Again.
The Pagulayan Leather Magnetic Chalk Holder Kit keeps your chalk locked in place and always within reach — so you can stay in your rhythm and focus on your shot. No more hunting for a missing cube, no more replacing chalk that vanished mid-session. The strong embedded magnets hold everything secure, while the holderless design means it feels natural in your hand — like you’re just holding the chalk itself.
Features
- Strong embedded magnets for a secure, slip-free hold
- Holderless design — no bulky, uncomfortable chalk holder
- Premium leather construction for durability and a refined look
- Includes metal adhesive plates for easy attachment to any chalk
- Low-profile form factor that integrates seamlessly into any setup
- Reduces drops and keeps chalk consistently accessible
Protect Your Joint. Every Time.
The PAGULAYAN Universal Joint Protector is the one protector built to fit virtually every joint on the market. Snap it on, feel the secure fit, and know your joint and collar are protected from dust, dings, and daily wear. It’s satisfyingly simple — and once you start using it, you won’t want to play without it. Every order currently includes a Pagulayan mystery gift (while supplies last).
Compatibility — Works on 99% of joints, including:
- Radial, 3/8x10, 3/8x10 Modified
- Wavy 1, Wavy 2
- Uni-Loc
- 5/16x18 Pilot & Flat Face
- 5/16x14 Pilot & Flat Face
- 3/8x14 (Cuetec)
- 3/8x11
Features
- Fits 99% of pool cue joints
- Durable silicone construction for a snug, secure hold
- Protects joint and collar from dust and damage
- Satisfying snap-on/snap-off design
- Lightweight and easy to carry
These ivory colored threaded ferrules are a very nice off white color which produce a medium hit. They machine and install easily and come drilled and tapped, 5/16-18. These are 14mm and are 1" in length. Priced right and a great high action ferrule.