Search results

This is our Ivorite-III™ Melamine ferrule material; the finest ferrule material available today. This is a Linen Melamine material that is rolled and molded for unequaled performance. This product bonds well with epoxy, cyanoacrylate and wood glue.

Our prices may be slightly higher than other resellers for similar material but our Ivorite-III™ is very clean. Those of you who have experienced black dots, streaks, etc. you all know what we're talking about. Remember, you get what you pay for.

They are .562 round X 1 foot in length.

Made in The USA

Cyanoacrylates (CAs) have become the adhesive of choice for many cue building applications. High quality CAs, when used properly, form bonds that in many cases are stronger than the material that is being adhered.

Our Cyanoacrylates are highly refined which, combined with its freshness, gives a guaranteed 2 year shelf life. There is no finer CA available.

A Word From Cue Components: We have used every product on the market and this CA is by far the finest for custom cue building. Our CA is highly refined and fresh, fresh, fresh. Our CA doesn't sit in the manufacturers warehouse and then sit on store shelves for months. Freshness is very important. Try it and see for yourself. If you are not 100% satisfied, just return the unused portion for a complete refund.

How To Use Cyanoacrylates

Heat and moisture will decrease the shelf life of CAs. Unopened bottles can be stored in a freezer or refrigerator, but allow them to reach room temperature before using. Keep your bottles in a cool place that won't be exposed to direct sunlight and store away from bottles of accelerators. Due to the freshness of our CAs, their shelf life is guaranteed for 24 months.

For the initial opening of the top, loosen and retighten the top first to relieve internal pressure, then hold the bottle against a near vertical surface and cut off the top 1/32" with a knife or razor blade without squeezing the bottle. To prevent clogging, do not let the tip of the nozzle touch a surface that has been sprayed with any Accelerator. Before replacing the colored cap, set the bottle down hard to knock the remaining CA back into the bottle before squeezing it in an upright position to blow air through the nozzle, then wipe the tip clean.

With all CAs, the closer the parts fit together, the stronger the bond. Always hold the bonding surfaces together as tightly as possible. Any rough spots on the mating surfaces should be smoothed out. Although CAs will hold objects together with considerable strength within seconds, the full strength of the bond is not reached for several hours. Allow for this before subjecting parts to maximum stress. Also, CAs are generally a little less brittle and have higher strength when they are allowed to cure on their own.

Please Note: All our Cyanoacrylates are offered in 2 oz bottles. When comparing price, be sure you are comparing 2 oz bottles. These are 2oz bottles so be sure to compare similar sizes when checking prices.

Buffalo Horn Ferrules, Joints, Butts & Slabs – Natural Cue Building Material

At Cue Components, our genuine buffalo horn components are a trusted material for cue makers building or upgrading custom pool cues. We offer buffalo horn ferrules, joints, butts, and slabs, giving cue builders a versatile natural material for both performance and decorative work.

Buffalo horn is known for its strength, durability, and deep natural finish. It machines cleanly, polishes beautifully, and provides a solid, traditional feel many cue makers appreciate. Whether you’re installing buffalo horn ferrules, building horn joint collars, creating butt caps, or using slabs for inlays and accents, this material works exceptionally well in custom cue construction.

Perfect for custom cue building, cue upgrades, cue repair, and decorative inlays, buffalo horn remains a popular natural material among cue makers.

Our inventory is deep, where you'll always get well aged shafts that were turned months ago. You'll never get shafts from us that were turned last week. Our inventory is extremely deep and aged so we can immediately supply shafts in virtually any quantity. Our shaft wood is your shaft wood. We turn them incrementally with a minimum of 45 days between passes. We can do it that way because of the depth of our shaft wood inventory.

There is no one in this business that can provide the quality, quantity and aged wood as we do. Whether you order 1, 100 or 500 we can ship today!

We supply shafts in 30" lengths which is sufficient to make any shaft for 99.999% of pool players. Most want a standard shaft at 29" and very few want longer shafts on their cues. You'll get an occasional order for a 29.5" and seldom a 30" but these are sufficient to cover any needs. Working with longer shafts will throw off your taper or you'll have to adjust the taper when you cut off the additional length. Working as close to final is always easier and less complicated. We like uncomplicated.

Straight grain! If you want to see the definition of straight grain, please click on the above picture. These boards which were just jointed, will allow you to see the straight grain pattern. It doesn't get any better than these boards!

Grading is subjective and varies with each persons definitions. We endeavour to grade conservatively and accurately.

Grading Scale

Grade Pro-Growth

These are the best of the best. These are all high growth ring concentration, white and perfectly straight-grained. Just take a close look at the two photo's.This is genuine old-growth maple that rarely come up for sale these days. We've latched on to a supplier and that's all we're getting. Don't bother looking for these from anyone else as they are virtually nonexistent except through us.

We will guarantee 18+ rings to the inch and they are being sold as 1" X 30" rounds. They are all straight and tight-grained. These will weigh in at well over 4oz when tapered down to a final shaft. These are dense and produce a very distinctive 'hit'. You cannot purchase better shaft wood

Grade AAA Superb: These are absolutely Superb shafts with an incredible number of growth rings. These will average 12 - 18+ rings per inch with many in the 18+ rings per inch. These are seldomly seen this nice. In fact, these are like having naturally laminated shafts.

Grade AAA: These are straight, white, may contain a slight amount of sugar but these are usually clear, no grain run-off and a beautiful straight spine. These average about 6 -12 or more growth rings per inch. These are strictly for high end cues or low end cues with great shafts.

Grade AA: These are straight, white and a tiny amount of sugar may show (very slight), may have slight grain run-off. These average 6 -12 or more growth rings per inch. Excellent for middle range cues -- excellent value

Grade A: These are straight, white and/or may be slightly off white, small amounts of sugar may show, slight grain run off and may show a slight wiggle in the grain. These average 6-12 or more growth rings per inch. Great for lower end cues and sneaky petes. These are really nice dowels and will make very nice shafts.

Camel Bone Ferrules & Slabs – Premium Ivory Alternative for Cue Building

At Cue Components, we’re proud to offer genuine camel bone ferrules and slabs—a trusted natural alternative to ivory ferrules for pool cue building and upgrades. Camel bone provides excellent density, durability, and a crisp, responsive hit that many cue makers look for when building high-performance cues.

These real camel bone ferrules machine clean, polish beautifully, and maintain the natural look cue builders appreciate. The slabs can also be used for inlays and decorative work, making them a versatile material for custom cue building, cue repairs, and shaft upgrades.

Perfect for cue makers looking for a legal ivory alternative, our camel bone offers the performance, strength, and traditional feel players expect.

Camel Slabs: Length: 8in, Width: 1in, Thickness: 4mm 

Camel Ferrules: .51 x 1 inch

Cue Components is finally offering their own Stack Leather Wrap™ - a superior leather than what has previously been offered by Tiger "MAP CRAP" Products.

Now available in black, Tan, Red and Navy too!

What's the difference? Well a picture is worth a thousand words. As you can plainly see the Tiger Stack Wrap are glued together from thin strands which come from waste cuttings. This is called maximizing use of your leather down to the smallest piece of crap.

There is no need to rip people off with glued together, waste cuttings when you can give them a quality product for the same price. Albeit, we don't make as much profit but we are still making a profit and that's fine with us. We don't need to make a killing as making a living is just fine.

So, what have we learned? Well, we don't know about you but we've learned that Tiger Products has been selling us crap for years and we were all taken in by his BS. You really don't know until you go out there and look around to find comparable products. We've found not only comparable but better quality and we can sell it to you for less than you can buy it from Tiger even if you got their distributor pricing!

Each wrap contains enough leather (15+ feet) to do a standard wrap channel (which is 99.99% of all cues). If you order enough for 3 cues, you will receive over 45+ feet.
Width: 6mm
Thickness: 2mm

303 stainless steel, Brass, Titanum uniloc quick release joint pin- unplanted and uniloc threaded self-aligning quick release brass cue shaft insert

INSERTS SOLD SEPARATELY

Upgrade or retrofit your pool cue with this precision-machined 3-piece extension kit, designed for cue makers, repair technicians, and custom cue builders. This kit provides the hardware needed to install a removable rear cue extension, allowing players to quickly add extra reach when needed while maintaining a clean, professional finish.

Manufactured from high-quality materials for durability and a precise fit, this extension kit is ideal for new cue builds or retrofitting existing cues. Available in multiple sizes to match your specific cue building requirements.

Features:

• Precision-machined 3-piece extension hardware
• Designed for installing removable rear cue extensions
• Ideal for custom cue builds and cue repairs
• Durable construction for long-lasting performance
• Professional fit and finish

Brass Pin measurements: 2.275 Long | .65oz | 3/8-10 Frontnose | 5/16 Barrel and 5/16-14 Thrd.

Barringer's E-Z Shine Bees Wax is pure, natural and triple filtered as compared to the dirty and nasty looking Tiger Bees Wax. Simply look at the color variation. This product comes in blocks rather than rounds which makes it easier to use and apply. Round doesn't work as well. These are the same weight as the Tiger MAP CRAP Bees Wax but ours is a higher grade and less money too!

You can use these to burnish the sides of tips and use to fill in cracks on tables as well. Do not use this on shafts unless you can burnish with a lathe. These blocks are exceptional quality and value!

Cue Components Shaft & Tip Leather Burnisher is Made In The USA of fine quality leather. You can burnish the shaft and cue tips as well.

Just grab the shaft and stroke up and down to seal the wood and make the shaft slick. This will seal out moisture and not allow the grain to raise. The shaft will be slick and smoother to the feel when shooting.

The size is 2.5" x 4".

Gaboon Ebony & Birdseye Maple 4-Prong Full Spliced Butt Blank

Crafted for cue makers who appreciate premium materials and traditional construction, this 30” full spliced butt blank pairs rich Gaboon Ebony with highly figured Birdseye Maple for a timeless, high-contrast look.

Built in true 4-prong full splice construction for classic feel, strength, and balance, each blank is oversized at approximately .900–.950 at the joint and 1.350–1.400 at the butt, giving you flexibility for your custom build.

• Premium Gaboon Ebony points
• Highly figured Birdseye Maple core
• 30” full spliced butt blank
• Approx. .900–.950 at joint
• Approx. 1.350–1.400 at butt
• Oversized for custom cue building

Handcrafted with close-tolerance points and premium materials throughout, this blank is built for makers who want performance and beauty in one exceptional foundation.

At Cue Components, we hand-select woods that make a statement before the cue ever hits the table. Our Cocobolo & Birdseye Maple 4-Prong Full Spliced Butt Blank is built for makers who want bold color, natural figure, and uncompromising performance.

Cocobolo is one of the most sought-after rosewoods in cue building — known for its fiery mix of deep reds, burnt orange, dark brown, and black streaking. Each piece carries dramatic contrast and natural movement, making every blank truly one of a kind. Dense, heavy, and naturally oily, Cocobolo offers exceptional durability and long-term stability in full splice construction, contributing to a solid, powerful feel.

Paired with premium Birdseye Maple, the contrast becomes even more striking. The bright maple base, filled with tight grain and signature eye figuring, adds depth and dimension under finish. Birdseye Maple remains a staple in high-end cue building for its strength, consistency, and clean playing characteristics.

The traditional 4-prong full splice design not only reinforces structural integrity from end to end but also highlights the bold Cocobolo points against the lively Birdseye Maple — a classic combination with unmistakable presence.

This blank isn’t just material — it’s the beginning of a cue that demands attention.

Take your cue building to a new level with these high quality exotic custom blanks. Now, you can make your own custom full spliced cues with these high quality handcrafted 30" butt blanks. Made of Birdseye Maple with 4 points of Cocobolo. They are oversized (approximately .900/950 at the joint -- 1.350 -1.400 at the butt). The points are uniform within close tolerances. You will not be disappointed.

This is Genuine yellow Westinghouse Paper Micarta pool cue ferrule material from many moons ago. This is a paper based micarta ferrule material. This is not the asbestos Micarta; this is safer. This paper based micarta will generate a good amount of spin similar to the asbestos material. These are a rare ferrule material so get them while you can. Strictly in limited supply. Pricing subject to change without notice.
The photo above shows aged blocks which appear brown in color. When cleaned up, they show their natural color of a light yellow. These do darken with age as all old Micarta does. Order with confidence as this is the real deal.

These are approximately .540" round x 1.060" in length. The squares have a slightly larger diameter. The squares are approximately .560 square x 1.060" in length.

No quantity discounts as supplies are now very limited and we're running out.
Strictly limited supply so get them while you can. Prices subject to change without notice.

Joe Says:
"I just put one on my cue - WOW! Unless you've played with one of these, no words can describe the feel, hit and feedback. Best playing ferrule I've ever used".

These are the finest maintenance kits available and they offer versatility. These are best used when doing shaft and butt repairs when you need the work piece held precisely and firmly in your chuck. Each tool contains the male and female end. The barrel (without the threads) measure approximately 3" and the barrel is approximately .600" is diameter and made of high grade aluminum.

Our prices are the same for all models. Competitively priced to deliver strong value without compromising quality

These are high quality 3/8 x 10 and 3" in length.
These are what we refer to as old reliable and a great choice for cue makers.

INSERTS SOLD SEPARATELY

You can't beat this for the size and price! Why pay up to $40 and more for an actual Tina Blade when this will do the same job for 1/4 of the price! Plus you get extra blades too as well as a safety cover.

A great value and much safer than a steel Tina Blade!