Cue Builder Maintenance, Supplies and Tools

This is our 'live' center. You'll note that the point protrudes a little longer than usual. We made them like this to keep the work piece out far enough so that you can make cuts to the end of the wood without worrying about interference from the 'live' center. This item works on any large metal lathe using a chuck.

These are turned round stock to approximate size of : .960" diameter X 1.125" in length. We sell only quality, pre-ban and well documented ivory. We make the market and you won't find it for less.

The Short Story: If you wish to purchase ivory, you must be a resident of the State of Florida. If you are not a Florida resident then no legal pre ban ivory may be purchased.

YOU ARE FREE TO PURCHASE ANYTHING ELSE.

By purchasing LEGAL PRE BAN IVORY ONLY from this web site, you attest and confirm that you are a legal resident of the State of Florida and have absolutely no intention of shipping any legal pre ban ivory out of the State of Florida.

We can only ship legal pre ban ivory to Florida residents only. Absolutely NO interstate sales. Florida sales only.

NOTICE: We will vigorously assist law enforcement on any out-of-state customers or alleged “straw man” deals which could violate the law. What is a "straw man" deal? When you ask your friend, relative or whatever who resides in Florida to make the purchase for you with the intentions of having them ship it to you in your state.

Also, we will not ship pre ban ivory to hotels while you are visiting Florida. Florida pre ban ivory sales to Florida residents only! Period!

As you may have known that Chem Pak is not producing the wax we have used for many years. so we have come up with our own formula Please check out the Cue Components's cue wax.

This quality carnauba cue wax is specifically formulated for billiard cues (without any harmful additives).

It's best used for finishing shafts as it provides an ultra smooth and glossy finish without all the drag associated with other waxes.

Try it as you will not be disappointed and you'll be back for more. You won't find this quality product for less!

These are the 2 ounce jars!!

These are turned round stock to approximate size of: 1.350" diameter X 1.125" in length.
We are the market makers and leaders in quality, pre-ban legal and well documented ivory.

The Short Story: If you wish to purchase ivory, you must be a resident of the State of Florida. If you are not a Florida resident then no legal pre ban ivory may be purchased.

YOU ARE FREE TO PURCHASE ANYTHING ELSE.

By purchasing LEGAL PRE BAN IVORY ONLY from this web site, you attest and confirm that you are a legal resident of the State of Florida and have absolutely no intention of shipping any legal pre ban ivory out of the State of Florida.

We can only ship legal pre ban ivory to Florida residents only. Absolutely NO interstate sales. Florida sales only.

NOTICE: We will vigorously assist law enforcement on any out-of-state customers or alleged “straw man” deals which could violate the law. What is a "straw man" deal? When you ask your friend, relative or whatever who resides in Florida to make the purchase for you with the intentions of having them ship it to you in your state.

Also, we will not ship pre ban ivory to hotels while you are visiting Florida. Florida pre ban ivory sales to Florida residents only! Period!

For quantities over per 10, please email us for a quote.

This is without question the finest cue makers shaft sealant/stabilizer and final coat shaft sealer on the market today.

Speed Seal II Shaft Sealer & Stabilizer is sold in 1 Gallon and applies easily. And, it dries quickly too. Very quick!

For refinishing shafts: All you do is apply two coats back-to-back, sand (with 800) and wax. It's that quick!

For sealing shafts between cuts: Best to wipe on after the first cut and then again 2 cuts from final for lasting protection and stabilization. Add again at final stage when prepping the shaft for the actual sale.

When you're done you'll have a finish that is smooth as silk and will remain that way through all the abuse of playing.

Ever wonder how some cue makers get their shafts to glide like silk? Well, wonder no more!

Leading cue makers have been using this product for years with phenomenal results. You can too.

A Tip Shaping Guide & Blade Rest

This is a shaping guide for those who prefer to use the utility blade to hand shape the tip.

It has 3 radius guides on the rest. Nickel, Penny and Dime size radiuses.

This takes the guess work out of it and mounts on one side of your tool post.

Weight : 0.5 lbs

Dimensions : 4 × 3 × 1 in

We are the source for genuine elephant ivory pool cue ferrules. The picture to your left shows well over 600 pool cue ivory ferrules. We are probably the largest seller of pool cue ivory ferrules in the USA and this batch was for one client.

These ferrules are cut from genuine elephant ivory. You won't find it for less.

The Short Story: If you wish to purchase ivory, you must be a resident of the State of Florida. If you are not a Florida resident then no legal pre ban ivory may be purchased.

YOU ARE FREE TO PURCHASE ANYTHING ELSE.

By purchasing LEGAL PRE BAN IVORY ONLY from this web site, you attest and confirm that you are a legal resident of the State of Florida and have absolutely no intention of shipping any legal pre ban ivory out of the State of Florida.

We can only ship legal pre ban ivory to Florida residents only. Absolutely NO interstate sales. Florida sales only.

NOTICE: We will vigorously assist law enforcement on any out-of-state customers or alleged “straw man” deals which could violate the law. What is a "straw man" deal? When you ask your friend, relative or whatever who resides in Florida to make the purchase for you with the intentions of having them ship it to you in your state.

Here is our own custom 6 flute router bit for ultra smooth cuts on shafts and butts. The cut is so smooth that it appears as if the finished piece has been sanded and buffed! Exceptionally clean cuts. A must for the serious cue builder.

The arbor is .250"

We use this 6 flute blade on our router when cutting shafts and butts with our 14" X 40" tapering lathe.