Pool Cue Parts

We are offering the finest and most populate size dyed sycamore available in 1.350" X 11.5" X .6mm thick. These veneers strips are high quality and very consistent. The colors are vibrant, consistent and have withstood the test of time. We offer a variety of different colors and are always adding more

For your edification, the .6mm are .75 each. The .6mm are great for any application especially when doing 4, 5, 6, or 8 points and if you want 3, 4 or even 5 veneer colors.

We no longer carry the .9mm veneers as they are no longer popular since most cue makers and buyers are trending towards finer and more detailed craftsmanship.

Pool Cue Rubber Bumpers – Durable Replacement Bumpers for Cue Repair & Building

Upgrade or replace worn-out cue bumpers with high-quality rubber bumpers designed for durability and a secure fit. These pool cue bumpers help protect your cue from impact while providing a clean, finished look for both custom builds and repairs.

Made from resilient rubber, these bumpers are built to absorb shock and withstand repeated use, making them ideal for cue makers, repair professionals, and players maintaining their equipment.

Consistent sizing ensures easy installation and compatibility with a wide range of pool cues.

A) Beveled Top (which requires an allen screw)

B) Threaded Stem Type - 3/8 x 16

C) Large Push In Flat South West Style

D) Push In Flat South West Style

Check out our new SouthWest Style Joint Pins.

Cue Components Pure White Phenolic® was developed specifically for custom cue makers. This rod is manufactured using the finest materials and a proprietary pigmented-resin system so that you don't get the linen look under magnification similar to the inferior stuff sold by other sources in Skokie. The material is strong, easy to machine, and Pure White in color after applying a clear coat.

Prices are per Foot. 

Cue Components, Infinity Jet Black Phenolic® was developed specifically for custom cue makers. This rod is manufactured using the finest materials and a proprietary pigmented-resin system so that you don't get the linen look under magnification similar to the inferior stuff sold by other sources in Skokie. The material is strong, easy to machine, and jet black in color after applying a clear coat.

303 stainless steel, Brass, Titanum uniloc quick release joint pin- unplanted and uniloc threaded self-aligning quick release brass cue shaft insert

INSERTS SOLD SEPARATELY

These are original Meucci replacements ferrule rods. They are .562 round X 1 foot in length. You can cut, drill and tap these as needed for your requirements.

Cue Components is finally offering their own Stack Leather Wrap™ - a superior leather than what has previously been offered by Tiger "MAP CRAP" Products.

Now available in black, Tan, Red and Navy too!

What's the difference? Well a picture is worth a thousand words. As you can plainly see the Tiger Stack Wrap are glued together from thin strands which come from waste cuttings. This is called maximizing use of your leather down to the smallest piece of crap.

There is no need to rip people off with glued together, waste cuttings when you can give them a quality product for the same price. Albeit, we don't make as much profit but we are still making a profit and that's fine with us. We don't need to make a killing as making a living is just fine.

So, what have we learned? Well, we don't know about you but we've learned that Tiger Products has been selling us crap for years and we were all taken in by his BS. You really don't know until you go out there and look around to find comparable products. We've found not only comparable but better quality and we can sell it to you for less than you can buy it from Tiger even if you got their distributor pricing!

Each wrap contains enough leather (15+ feet) to do a standard wrap channel (which is 99.99% of all cues). If you order enough for 3 cues, you will receive over 45+ feet.
Width: 6mm
Thickness: 2mm

Our inventory is deep, where you'll always get well aged shafts that were turned months ago. You'll never get shafts from us that were turned last week. Our inventory is extremely deep and aged so we can immediately supply shafts in virtually any quantity. Our shaft wood is your shaft wood. We turn them incrementally with a minimum of 45 days between passes. We can do it that way because of the depth of our shaft wood inventory.

There is no one in this business that can provide the quality, quantity and aged wood as we do. Whether you order 1, 100 or 500 we can ship today!

We supply shafts in 30" lengths which is sufficient to make any shaft for 99.999% of pool players. Most want a standard shaft at 29" and very few want longer shafts on their cues. You'll get an occasional order for a 29.5" and seldom a 30" but these are sufficient to cover any needs. Working with longer shafts will throw off your taper or you'll have to adjust the taper when you cut off the additional length. Working as close to final is always easier and less complicated. We like uncomplicated.

Straight grain! If you want to see the definition of straight grain, please click on the above picture. These boards which were just jointed, will allow you to see the straight grain pattern. It doesn't get any better than these boards!

Grading is subjective and varies with each persons definitions. We endeavour to grade conservatively and accurately.

Grading Scale

Grade Pro-Growth

These are the best of the best. These are all high growth ring concentration, white and perfectly straight-grained. Just take a close look at the two photo's.This is genuine old-growth maple that rarely come up for sale these days. We've latched on to a supplier and that's all we're getting. Don't bother looking for these from anyone else as they are virtually nonexistent except through us.

We will guarantee 18+ rings to the inch and they are being sold as 1" X 30" rounds. They are all straight and tight-grained. These will weigh in at well over 4oz when tapered down to a final shaft. These are dense and produce a very distinctive 'hit'. You cannot purchase better shaft wood

Grade AAA Superb: These are absolutely Superb shafts with an incredible number of growth rings. These will average 12 - 18+ rings per inch with many in the 18+ rings per inch. These are seldomly seen this nice. In fact, these are like having naturally laminated shafts.

Grade AAA: These are straight, white, may contain a slight amount of sugar but these are usually clear, no grain run-off and a beautiful straight spine. These average about 6 -12 or more growth rings per inch. These are strictly for high end cues or low end cues with great shafts.

Grade AA: These are straight, white and a tiny amount of sugar may show (very slight), may have slight grain run-off. These average 6 -12 or more growth rings per inch. Excellent for middle range cues -- excellent value

Grade A: These are straight, white and/or may be slightly off white, small amounts of sugar may show, slight grain run off and may show a slight wiggle in the grain. These average 6-12 or more growth rings per inch. Great for lower end cues and sneaky petes. These are really nice dowels and will make very nice shafts.

Listing is for 1 LB roll (25-30Cues)

Irish Linen Cue Wrap - Strength and Beauty
Our genuine Irish linen wrap brings together the best of form and function. Handwoven in County Cork, Ireland, from 100% European flax, this cue wrap combines artisanal craftsmanship with unparalleled durability.

Timeless Aesthetics
Our linen wrap has beautiful colors and a classic, upscale look for your pool cue. The rich, vibrant hues and visible texture create an eye-catching accent piece.

Superior Strength

The cross-wound thread pattern gives our Irish linen unequaled strength for wrapping cue handles. The threads grip tightly, providing a secure hold that prevents slipping. This ensures excellent playability and control.

Consistent Quality

You can trust the consistency and quality of our imported Irish linen. We use only the finest harvest of European flax to produce an even, high-performing wrap every time.

Material Specifications

Firstly, it is handwoven in County Cork, Ireland
Secondly, it has coss-wound thread pattern
Thirdly, it has tight grip prevents slipping
Forthly, it is highest grade harvest of flax

Choose the Best for Your Cue

So, treat your cue to the finest linen wrap available. Our genuine Irish linen's strength, beauty, and quality will give you confidence in every shot. Order now to experience pool play at its best!

Buffalo Horn Ferrules, Joints, Butts & Slabs – Natural Cue Building Material

At Cue Components, our genuine buffalo horn components are a trusted material for cue makers building or upgrading custom pool cues. We offer buffalo horn ferrules, joints, butts, and slabs, giving cue builders a versatile natural material for both performance and decorative work.

Buffalo horn is known for its strength, durability, and deep natural finish. It machines cleanly, polishes beautifully, and provides a solid, traditional feel many cue makers appreciate. Whether you’re installing buffalo horn ferrules, building horn joint collars, creating butt caps, or using slabs for inlays and accents, this material works exceptionally well in custom cue construction.

Perfect for custom cue building, cue upgrades, cue repair, and decorative inlays, buffalo horn remains a popular natural material among cue makers.

High grade stainless steel, Brass, Titanium 5/16-18 x 3" in length and widely used as joint screws in a variety of cues.

INSERTS SOLD SEPARATELY

These are 5/16-14 x 3" in length. These are widely used in pool cues and exceptional quality stainless steel, Brass, Titanium.

INSERTS SOLD SEPARATELY

These are high quality 3/8 x 10 and 3" in length.
These are what we refer to as old reliable and a great choice for cue makers.

INSERTS SOLD SEPARATELY

Cue Components, Natural brown Phenolic® was developed specifically for custom cue makers. This rod is manufactured using the finest materials and a proprietary pigmented-resin system so that you don't get the linen look under magnification similar to the inferior stuff sold by other sources in Skokie. The material is strong, easy to machine, and natural brown in color after applying a clear coat.
Prices are per foot. 

This is our Ivorite-III™ Melamine ferrule material; the finest ferrule material available today. This is a Linen Melamine material that is rolled and molded for unequaled performance. This product bonds well with epoxy, cyanoacrylate and wood glue.

Our prices may be slightly higher than other resellers for similar material but our Ivorite-III™ is very clean. Those of you who have experienced black dots, streaks, etc. you all know what we're talking about. Remember, you get what you pay for.

They are .562 round X 1 foot in length.

Made in The USA

These are similar to the 'Radial' pin but we're not allowed to use the word 'radial' as it is trademarked so we're using the word 'radius'. You can buy the 'radial' pin and pay more or you can buy our 'radius' and save money. We defy you to tell them apart.

INSERTS SOLD SEPARATELY

Well, it's finally here and here is as much of it as you could possibly want. This is micarta rod. It is yellowish in color. Its hit resembles the old micarta from years ago. In very high demand! You can probably buy this elsewhere but not at this huge discount.

They are .562 round X 1 foot in length.