
Cyanoacrylate Adhesives
Cyanoacrylates (CAs) have become the adhesive of choice for many cue building applications. High quality CAs, when used properly, form bonds that in many cases are stronger than the material that is being adhered.
Our Cyanoacrylates are highly refined which, combined with its freshness, gives a guaranteed 2 year shelf life. There is no finer CA available.
A Word From Cue Components: We have used every product on the market and this CA is by far the finest for custom cue building. Our CA is highly refined and fresh, fresh, fresh. Our CA doesn't sit in the manufacturers warehouse and then sit on store shelves for months. Freshness is very important. Try it and see for yourself. If you are not 100% satisfied, just return the unused portion for a complete refund.
How To Use Cyanoacrylates
Heat and moisture will decrease the shelf life of CAs. Unopened bottles can be stored in a freezer or refrigerator, but allow them to reach room temperature before using. Keep your bottles in a cool place that won't be exposed to direct sunlight and store away from bottles of accelerators. Due to the freshness of our CAs, their shelf life is guaranteed for 24 months.
For the initial opening of the top, loosen and retighten the top first to relieve internal pressure, then hold the bottle against a near vertical surface and cut off the top 1/32" with a knife or razor blade without squeezing the bottle. To prevent clogging, do not let the tip of the nozzle touch a surface that has been sprayed with any Accelerator. Before replacing the colored cap, set the bottle down hard to knock the remaining CA back into the bottle before squeezing it in an upright position to blow air through the nozzle, then wipe the tip clean.
With all CAs, the closer the parts fit together, the stronger the bond. Always hold the bonding surfaces together as tightly as possible. Any rough spots on the mating surfaces should be smoothed out. Although CAs will hold objects together with considerable strength within seconds, the full strength of the bond is not reached for several hours. Allow for this before subjecting parts to maximum stress. Also, CAs are generally a little less brittle and have higher strength when they are allowed to cure on their own.
Please Note: All our Cyanoacrylates are offered in 2 oz bottles. When comparing price, be sure you are comparing 2 oz bottles. These are 2oz bottles so be sure to compare similar sizes when checking prices.
Share